This heavy duty tie rod and drag link kit from Rugged Ridge fits 1987-1995 Jeep Wrangler YJ. One ton strength with no modifications.

The components in this kit are intended to improve the Off-road capability and durability of your Jeep® factory tie-rod and cast steering linkage.  If you are a committed offroader, consider this cross-over steering system as one important part of your overall suspension build-up. The Jeep® suspension design and wide range of after-market suspension components, tires, and wheels used by offroad enthusiasts requires special attention to instructions regarding the installation and adjustment of this kit and overall consideration in the selection and compatibility of your suspension set-up with this kit. Depending on the height and configuration of your suspension, you may need to adjust or purchase additional components to assure desired steering characteristics and reduce degraded steering feedback caused by high-angle inputs between the pitman arm, drag link and HD  tie-rod and cast linkage supplied with this kit.  Depending on your Jeep® experience and mechanical skills, Rugged Ridge® recommends seeking advice from or having this kit installed by a qualified off-road mechanic who can inspect your suspension build, adjust steering components and set alignment to optimize your steering system and the features of this kit.  If you have remaining technical questions after reading the instructions we are here to help. Contact us toll free at (1-800-449-6649).

 - Use of adjustable drag link and drop pitman arm may be required for vehicles with over a 2” lift and is   strongly recommended for suspension builds over 4”.   This kit has been designed for vehicles with up to a   4” suspension lift.  (Drop pitman arm, Rugged Ridge® part # 18006.50 87-06 Wrangler).- Tie-rod end wear and required maintenance will vary depending on your suspension configuration and   vehicle use.  Select and adjust pitman arm, drag link and tie rod to minimize input angle between drag   link and tie rod.  Routinely inspect tie rod ends for wear, and for proper torque and security.   Do not use if kit parts are damaged or trail-repaired using high heat.- During installation, keep wheels and steering components centered.  Before use, assure your wheel/tire   choice is properly balanced and vehicle professionally aligned.  Read and follow all instructions and   warnings accompanying this product and those in your Jeep® owners manual and OFF-Road Driving   Supplement.- Strength, size and attachment points of tie-rod and steering linkage require additional wheel clearance.  HD Cross-Over Steering System is generally not compatible with smaller OEM steel wheels or wheels with a  deep backspacing.  Before installation, use assembled tie rod for preliminary check of expected wheel/tire  clearance during full sweep of steering.  Perform post-installation inspection as instructed below.  Do not  use if tie rod contacts any portion of wheel/tire.

PVE OffRoad offers free shipping to the lower 48 States on most orders over $49.00. Some exceptions apply.